ACER ASPIRE X3300 PRO-NETS MODEM DRIVER DETAILS:
|File Size:||13.3 MB|
|Supported systems:||Windows All|
|Price:||Free* (*Free Registration Required)|
ACER ASPIRE X3300 PRO-NETS MODEM DRIVER
Unplug the power cord from the power outlets. Unplug the power cord from the system. Unplug all peripheral cables from the system. Place the system unit on Acer Aspire X3300 Pro-Nets Modem flat, stable surface. A L5 BZN C60 Chapter 3 29 38 Removing the Side Panel 1. Perform the pre-disassembly procedure described on page Remove the two screws A located on the rear edge of the side panel. Acer Aspire X3300 Pro-Nets Modem the side panel toward the back of the chassis until the tabs on the cover disengage with the slots on the chassis. Lift the side panel away from the system and put it aside for reinstallation later.
Remove the side panel. Refer to the previous section for instructions.
Acer Aspire X3300 Windows XP & 7 Drivers
Remove the front bezel. Release the front bezel retention tabs from the chassis interior.
Detach the bezel slightly away from the chassis. Disconnect the LED cable from the bezel and remove the bezel.
Acer. Aspire X3300/X5300 Service Guide
For X model, skip this step. The heat sink becomes very hot when the system is on. NEVER touch the heat sink with any metal or with your hands.
See Removing the Side Panel on page See Removing the Front Bezel on page Use a long-nosed screwdriver to loosen the four screws on the heat sink, then lift the heat sink fan assembly away from the mainboard. Lay down the heat sink fan assembly, in an Acer Aspire X3300 Pro-Nets Modem position, on top of the optical drive, as shown below, then disconnect the fan cable from the mainboard.
|Kramer VP-444 Presentation Scaler-Switcher||Iklan Atas Artikel|
|TP-Link TL-PA2010KIT v1 Powerline||Driver Request|
|Adaptec AIC-7899 Ultra160 PCI SCSI Card||Ask a Question|
Remove the heat sink fan assembly from the chassis then lay it down in an upright position with the thermal patch facing upward. Do not let the thermal patch on the heat sink fan assembly touch the work surface.
Acer Aspire X Drivers for Windows 7 , XP Download Driver
Use an alcohol pad to wipe off the thermal grease from both the heat sink and the processor. Before removing a processor from the mainboard, make sure to create a backup file of all important data.
The processor becomes very hot when the system is on. Allow it to cool off first before handling.
Drivers For Free - Acer Aspire X Wireless Network Adapter Drivers
Release the load lever. Pull the load lever to the fully open, upright position. Pull out the processor from the socket. If you are going to install a new processor, note the arrow on the corner to make sure the Acer Aspire X3300 Pro-Nets Modem is properly oriented over the socket.
Chapter 3 33 42 Removing the Optical Drive 1. Disconnect the data and power cables from the optical drive. Disconnect the data and power cables from the HDD. Place the bracket on a clean, static-free work surface.
Chapter 3 35 44 7. This package contains the files needed for installing the Pro-Nets Modem Driver.
If it has been installed, updating (overwrite-installing) may fix problems, add. Aspire X Product Support for.
Aspire X Model Name: AX. What can I do if I am unable to connect via WiFi after completing an Acer Android.