Type: Driver
File Name:
File Size: 32.8 MB
13 (4.78)
Downloads: 10
Supported systems: Windows Vista (32/64-bit), Windows XP (32/64-bit), Windows 8, Windows 10
Price: Free* (*Free Registration Required)

Download Now

I compared my results with the AnandTech results seen here http: They do not seem to show there RAM speed tho. I did take mine up Gigabyte GA-P55A-UD3P SATA2 mhz but it did not seem to help so I went for tighter RAM timings which did help me out.

My chip would simply not boot at the vcore they showed: Gigabyte GA-P55A-UD3P SATA2, are you just using it while pushing the CPU to its limits? Not sure my extra cooled liquid cooling system can quite get my there or not. Still, 4 to 4.

One of these days, I'll get a hold of some decent Phase cooling. Gigabyte GA-P55A-UD3P SATA2 see boostedevo above was hitting 5ghz with 1. I'm wondering if one of the sticks is bad, or perhaps the memory and board aren't compatible.


I'm sure you got them in the right slots noted in the manual, try the steps below. Try each stick and see Gigabyte GA-P55A-UD3P SATA2 you get post. If they're good individually, keep adding a stick at a time.

Motherboard Gigabyte GA-P55A-UD3P SATA3.0 S1156 DDR3

If the 3rd or 4th gives you error, set the memory timings and voltage manually with the first 2 installed. Gigabyte GA-P55A-UD3P SATA2 add, try adding the 3rd and 4th sticks again. If you can't get them going at all, it'd be nice to try them on a friend's system or maybe have the local PC store try the RAM.

It's a pain, I know, but they'll usually do it for free. Let us Gigabyte GA-P55A-UD3P SATA2 how it goes. It gives me several short beeps in a row and a long beep at the end and restarts. Things I have done: Tested the PSU and graphic card in another pc with no problems.

I tried both PCIe slots. Tested with another graphic card. Tried 4 sticks of RAM in different slots.

Checked the socket, reseated the CPU- several times. Put it inside a case and then outside on the cardboard box. Tried it in another wall socket in another room.

[M] GIGABYTE PUD3P Motherboard Overclocking Test

Things I have not done: You probably won't run in to any issues if the QPI is kept to 1. VTT can take a little bit more too. I've only had to add a Gigabyte GA-P55A-UD3P SATA2 QPI when pushing the memory. And, most the voltage has had to go to the CPU.

Gigabyte GA-P55A-UD3P Motherboard Drivers Download for Windows 7, , 10

Give it a bit and see what happens. On WC benches, I am always The is much Gigabyte GA-P55A-UD3P SATA2 than the that I had, but there are still big diminishing returns near 5GHz. I jammed the with voltage when I first got it and noticed not long after that I was just running WAY more than it needed and it did in fact seem more stable with lower voltages than I started with.

  • Debian HCL - -assembled / Gigabyte MAX-UD3P
  • [M] GIGABYTE PUD3P Motherboard Overclocking Test
  • Only getting SATA II on GA-P55A-UD3 Motherboard - Storage
  • GigaByte GA-P55A-UD3P - motherboards specifications.
  • Gigabyte P55A-UD3 problem
  • Gigabyte GA-P55A-UD3P Intel LGA 1156 Motherboard

Some combinations that were too high just crashed the second I started a bench. I just got a Corsair Force SATA 3 GB SSD, and plugged it into one of the 2 SATA3 jacks on the Gigabyte GA-P55A-UD3 motherboard. In Gigabyte GA-P55A-UD3P SATA2 BIOS, I selected AHCI as well as enabling the Gen 3 for SATA.

MSI Z87-GD65 Gaming Lucid Virtu MVP GraphicsTo search drivers or utilities, select the motherboard model:
HP Envy 17-1007tx Notebook IDT HD AudioYou may also be interested in

HDD Sata II storage with Sata III SSD OS?SSD on GA-P55A-UD3 Rev - Storage. My Gigabyte GA-P55A-UD3P SATA2 it's still intact no bios upgrade or other (BIOS F11) sata2 ports and you should connect your ssd to the sata2_0 port.


Other Drivers